- How do I know what kind of bike chain I have?
- Are bicycle chains universal?
- Are 6 7 8 speed chains the same?
- Are e bike chains different?
- What is a 3 32 chain?
- How do I know my chain size?
- Is it OK to use WD40 on bike chain?
- How often should I change my bike chain?
- What is the best bicycle chain?
- Can I replace a 7 speed cassette with an 8 speed?
- Can I put a 9 speed cassette on a 7 speed hub?
- Are 8 and 9 speed chains the same?
How do I know what kind of bike chain I have?
Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.
Are bicycle chains universal?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. ... However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.
Are 6 7 8 speed chains the same?
5, 6, 7 and 8 speed chains
Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm. ... Going further narrower, like a 10, or 11 speed chain on an 8 speed cassette can and often does work.
Are e bike chains different?
The idea that e-bikes require a special type of bike chain compared to traditional, non-motorised bikes is a myth. The forces on the chain are the same whether your bike has a motor or not, so you can use any standard bike chain for your e-bike. Similarly, there's no difference between road and mountain bike chains.
What is a 3 32 chain?
3/32" (0.094", 2.30 mm) chain is used on derailer equipped bicycles that have more than 3 cogs at the rear. Even somewhat narrower chain, typically . 090" or 2.29 mm between the inner plates, is used for derailer-equipped bicycles with 9 or more sprockets at the rear.
How do I know my chain size?
How to Tell What Size Chain You Have
- The distance from the center of one pin to the center of the next pin, also known as the "pitch" of the roller chain.
- The diameter and width of the roller.
- Plate thickness, determined by measuring the plates from one flat side to another.
- Plate height is the dimension from the bottom to the top of the plate.
Is it OK to use WD40 on bike chain?
Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it's primary use is as a solvent or rust dissolver.
How often should I change my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike's chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.
What is the best bicycle chain?
Six of the best bike chains
- Sram PC1051. Part of SRAM's awe-inspiringly big range, the PC1051 is highly rated due to its proven durability. ...
- Wippermann Connex 10S0. ...
- Best money-no-object: KMC X11SL DLC. ...
- Best all-round: Shimano 5800 105 11spd. ...
- Best for Campy users: Campagnolo Potenza 11spd. ...
- Best all-round: Sram Force 12spd.
Can I replace a 7 speed cassette with an 8 speed?
A seven speed cassette will fit on an 8 speed freehub with the use of a spacer.
Can I put a 9 speed cassette on a 7 speed hub?
It depends.... If you take off the 7 speed cassette and there is a 4mm spacer, yes it will work. If the 7 speed cassette does not have a spacer, no a 9 speed won't fit...
Are 8 and 9 speed chains the same?
7, 8, and 9 speed chains have the same inner width, but 9 speed chains have thinner outer plates for a thinner overall chain. So while a 9 speed chain works fine on a 7 or 8 speed drivetrain, it will be a weaker chain that tends to "stretch" faster.